Who makes Williams furnaces?
Who makes Williams furnaces?
Continental Materials Corporation
Williams Manufacturer Overview Williams Furnace Company makes residential and commercial heating, air conditioning and ventilation products. Williams is a subsidiary of Continental Materials Corporation and is headquartered in Colton, California.
Where is the model number on a Williams Furnace?
The model number identification label, is located in the area where you light the pilot. It is a silver plate, somewhat like a sticker and a little larger than a postcard.
How do you reset a Williams wall heater?
1) Unscrew 3 mounting screws (1 on top and 2 on inside bottom by gas valve assemply) and pull cover/housing back. 2) Turn on thermostat. 3) Press/hold RED reset button (upper top left side of heater assembly; two wires were connected to it) for about 2 seconds. It immediately fired up.
Where are Williams furnaces made?
Colton, California
All Williams products are tested to the highest standards according to specifications set by the National Bureau of Standards. Engineering, R&D, testing and manufacturing take place at our factory in Colton, California.
How do I find the make and model of my furnace?
You can find the model and serial numbers (M/N and S/N) for your furnace by removing the top-front service panel and looking to the left side of the interior cabinet or the top of the blower deck, depending on whether your system is an 80% or 90% AFUE unit.
How old is my Williams furnace?
The date of production/manufacture or age of Williams® HVAC equipment can be determined from the serial number located on the data plate.
Where is the reset button on my wall heater?
Initially, turn off the power supply to the heating system by shutting off the breaker in the circuit box. Locate the reset button on the heater and press it to reset the heating system. It is usually located inside the blower area on the side of the blower motor.
How do you reset a gas wall heater?
Turn the power back on, then the main gas supply. Press and hold the reset button for about 30 seconds. Raise your thermostat to the desired temperature. This should ignite your furnace.
What is the best propane furnace?
Martin 766013 Vent Propane Heater — Best Overall. The Martin 776013 is a heavy-duty space heater that mounts directly onto your wall.
What is a direct vent gas heater?
A power vent heater uses a blower fan for exhaust gases whereas a direct vent has a natural draft exhaust. A direct vent heater draws combustion air from the outside while a power vent pulls air from inside the house. All oil-fired or gas water heaters need a source of combustion air and a way to vent the exhaust gases.
What is direct vent furnace?
The direct vent furnace comes as a ready-assembled unit. The unit consists of two main components: the outer housing and the flue system. First find a location to install the furnace. It needs to be on an outer wall for proper venting of the flue gases.