What is fuel injector calculator?

What is fuel injector calculator?

FuelTech makes the selection easier for all enthusiasts with its Fuel Injector Calculator. It is capable of recommending fuel injector sizing for naturally aspirated and turbo combinations that are run on gasoline, alcohol, or ethanol.

What is the Max fuel injector duty cycle?

Most injectors will max out at 80% duty cycle and this is the accepted industry standard. B.S.F.C is brake specific fuel consumption – How much fuel you are using per horsepower per hour

What psi should a 240cc injector run at?

A 240 CC injector tested at 43.5 PSI is run at 50 PSI. (X 1.0721), if all other engine management systems remain unchanged. * See notes below on which BSFC value to use. Warning: Duty cycle should not exceed 80% (0.80) for these calculations.

How many CFM do I need for a 100 hp injector?

The constants used are 160 CFM per 100 HP, and an 85% duty cycle for maximum injector pulsewidth. Injectors will go static at about a 92% duty cycle and should be sized for an 80% duty cycle to leave some “wiggle” room.

Which fuel injector sizes does your engine management system control?

FuelTech FT600, FT550, FT550LITE, and FT450 engine management systems are capable of controlling any fuel injector sizing, even the massive 850 lb/hr injectors found in super-high horsepower applications. The addition of a Peak & Hold driver box to any ECU allows ultimate control of low impedance fuel injectors.

How do I Register my Dosatron injectors for scheduled service reminders?

This free (that’s right, FREE) service allows you to register each of your Dosatron injectors for scheduled service reminders. Just tell us how often you’d like to be reminded. You can choose a 6-month, annual, or 18-month schedule and we’ll remind you via email when it’s time to perform scheduled maintenance on your Dosatron. Sign up below.