What does F11 mean on Miele dishwasher?

What does F11 mean on Miele dishwasher?

Miele Dishwasher Error Code = Fault code F11 (Drainage) = Water not draining away. Check the drain hose and drainage for blockages and clean.

How do you fix a dishwasher that will not drain?

So before you call a pro, troubleshoot your dishwasher using the following steps.

  1. Run your garbage disposal.
  2. Clean your sink’s air gap.
  3. Remove standing water.
  4. Clear up detergent mishaps.
  5. De-gunk the drain basket.
  6. Check the drain hose for kinks.
  7. Examine the drain hose for clogs.
  8. Replace the drain hose.

How do I reset my Miele washing machine?

First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians.

Why does my Miele dishwasher says drain?

The drain hose on the Miele dishwasher may get clogged, kinked or blocked and cause problems. The hose can also be checked for clogs by disconnecting it from the dishwasher, cleaning it out and reconnecting the hose and straightening it out.

How do you fix dishwasher that will not drain?

If draining your dishwasher is an issue, here are eight simple techniques to try at home.

  1. Run the Disposal.
  2. Check for Blockages.
  3. Load the Dishwasher Correctly.
  4. Clean or Change the Filter.
  5. Inspect the Drain Hose.
  6. Double-check the Drain Valve.
  7. Try Vinegar and Baking Soda.
  8. Listen to Your Machine While It’s Running.

How do you unclog a dishwasher with standing water?

Try Vinegar and Baking Soda Mix together about one cup each of baking soda and vinegar and pour the mixture into the standing water at the bottom of the dishwasher. Leave for about 20 minutes. If the water is draining or starting to drain at that time, rinse with hot water and then run the dishwasher’s rinse cycle.