What are 6011 rods good for?

What are 6011 rods good for?

The 6011 welding rod is useful for jobs that require deep penetration, no matter the position or welder setup. It is a solid all-around welding rod. Because it is an iron rod, it is useful for most kinds of iron and mild steel. You can handle just about anything with 6011 rods.

When would you use a 6011 welding rod?

E 6011 electrode is a general-purpose electrode performs welding in all positions and efficiently in vertical-up and over-head positions; it is used mainly for sheet metal welding and low silicon deposit application. The electrode arc is easy to control and produces a flat weld bead with light slag formation.

What’s the difference between 6011 and 6013 welding rods?

The 6013 electrode is best used for light to medium penetration on a thin metal, or sheet metal. The 6011 electrode offers more penetration than the 6013 so you can weld a slightly thicker material.

How strong is 6011 Rod?

Metal Web News claims that 6011 welding rods are capable of producing welds that feature a 60,000 psi minimal tensile strength. The 7018 welding rods produce stronger welds that feature minimal tensile strengths of 70,000 psi.

Can I weld pipe with 6011?

But if they were, the 6011 would be the twin sister of the 6010. They’re both Fast Freeze rods, making them great for root bases and pipe welding. Their smaller welding pool leaves little slag for easy clean up.

What is the difference between 6011 and E6011 welding rods?

Why are 6011 stick electrodes not specified or not used for root passes and pipe welding in general (other than AC pipe welding)? E6010 electrodes are intended for direct current (DC) only. While E6011 electrodes can be used on alternating current (AC), as well as DC.

Can you weld stainless steel with 6011 rods?

I’ve used 6011/6013 rods in a few instances that the weld didn’t need to be stainless or pretty. Had a guy I worked with used to surface ripper points with 6011, but it’s not ideal. You can weld most stainless with mild steel wire or rod, the welds will be softer than the steel and will rust.

What welding rod is stronger 6011 or 6013?

The 6013 has a more mild penetration with a larger pool that doesn’t cut through rust like the 6010 or 6011. This electrode is a favorite for structural welders based on its smooth arc. Its mild penetration and bigger pool leave larger, stronger, less defined beads.

Which welding rod is best?

Best All-Around Welding Rod

• Best Overall: Hobart 770458 6011 Stick.
• Best Vertical Welding Rod: Forney 31105 E6011.
• Best for Experienced Welders: Forney 30705 E7018.
• Best 6013 Welding Rod: Forney 303305 E 6013.
• Best 6010 Welding Rod: Forney 31610 E6010.

Is 6011 welding rod AC or DC?

The 6011 rods are the AC version of the popular 6010 welding rods for DC. The 6010 have a high cellulose sodium-type coating, can penetrate deeply and are used for many applications in the field.

Is 6011 a DC Rod?

While the 6011 was specifically designed for AC machines, it can also run on DC giving it an advantage over the 6010 electrodes (which can only do Direct Current Electrode Positive).

What is a 6011 welding rod commonly used?

6011 rod is one of the most common rods you will found as it can be used for general repairing work and fabrication. Despite of the welder position and other welding setups, welding rod 6011 is used primarily where deep penetration is required . Mainly, these rods are used by pipefitters and boilermakers.

Which are rod 6011 or 7018?

To answer your question directly, they are both great all-around rods to be used. 6011 is a fast-freeze rod with great penetration and violent arc, while 7018 has more liquid puddle and soft arc.

What is the difference between a 6011 welding rod?

Both 6010 and 6011 are commonly used welding rods which are often confused for each other. Their difference lies in their last numerals, “0” and “1” which account for their different flux composition, slag type, and current type that can be used. 6010 has high cellulose sodium-type coating, whereas 6011 has high cellulose potassium-type coating.

What are the sizes of welding rods?

Attention: Stick welding electrodes from 5/16 inches to 3/8 inches (or 7.9 millimeter to 9.5 millimeter) can be used for heavy welding procedures. But keep in mind that you can make heavy welds with 3/16 inches or 1/4 inch rods (or 4.8 millimeter or 6.4 millimeter) as well.