Is MERV 11 bad for your furnace?

Is MERV 11 bad for your furnace?

Using an air filter with a MERV rating that’s too high is just as bad as using one that’s too low. In particular, using an air filter with a MERV rating that’s too high can damage the compressor, heat exchanger, and air conditioner coil. In most cases, a MERV 11 air filter isn’t too high for residential use.

Is MERV 11 a good filter?

MERV 11 rated air filters have a filtration efficiency of a little over 90%, making them highly efficient. MERV 11 furnace filters effectively trap pollen, dust, lint, dust mites, and mold, along with smoke, pet dander, smog, auto emissions, bacteria, and other such fine particles.

What does MERV 11 mean on a furnace filter?

MERV 11 air filters block at least 65% to 79% of airborne particles in the 1.0 to 3.0-micron size range. And, they’ll provide 85% or better filtration of particles in the 3.0 to 10.0-micron range.

How often should you change a MERV 11 furnace filter?

The basic recommendation for furnace filters replacement is every 3-4 months for MERV 8, every 6 months MERV 10 and 11 and every year for MERV 16. There are other several factors to consider when determining when to change your home air filter.

Does MERV 11 filter coronavirus?

Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. By itself, using an upgraded HVAC filter is not enough to protect people from COVID-19.

Is MERV 11 good for allergies?

Our MERV 11 furnace filters are great for anyone with allergies. Not only do they filter out more contaminants than the MERV 8 filter, but they are an affordable option.

Which is better MERV 10 or MERV 11?

MERV rating 9-12 A MERV 9 will trap less than 50% of particles sized 1.0-3.0 microns, MERV 10 will stop up to 64%, MERV 11 will get up to 79%, and MERV 12 is capable of catching up to 89%.

Can I replace MERV 11 with MERV 12?

In general no. In order to use a Merv 12 to replace a Merv 11, you need to know if you system can handle the extra pressure drop caused by the higher efficiency Merv 12. My heat pump/ ventilation system cannot support the pressure drop of a Merv 12.

Can I replace MERV 11 filter with MERV 12?

We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close. That’s why you’re just as good going with a MERV 11 as with a MERV 12.

Are high MERV filters bad for furnace?

While the highest MERV ratings are the most effective for air quality, they can harm your HVAC system. A higher MERV rating means a higher resistance, which means less airflow. If the MERV rating on your furnace is too high, it may force your furnace to work too hard and leave it vulnerable to damages.