How do you make reindeer logs?

How do you make reindeer logs?

Plans for building a wooden reindeer with logs

1. Cut the body log to length. Place the thickest log on a workbench or sawhorse.
2. Drill holes in the body section.
3. Cut the legs and neck.
4. Adjust the legs and neck.
5. Assemble the reindeer’s body.
6. Cut the head to size.
7. Drill holes in the head section.
8. Make and mount the antlers.

How do you make reindeer from birch logs?

1. Step 1: Cut a Piece of Branch for the Body.
2. Step 2: Cut a Piece of Branch for the Head.
3. Step 3: Cut a Piece of Wood for the Ears.
4. Step 4: Drill Holes Into the Body Section.
5. Step 5: Insert the Legs and Tail.
6. Step 6: Drill Holes Into the Head Section.
7. Step 7: Add the Eyes and Nose.
8. Step 8: Insert the Antlers.

How do you make a reindeer stick?

Just follow these basic instructions to create your own little herd of reindeer.

1. Cut your sticks. Use pruning shears to cut some fairly straight pieces from sticks.
2. Drill holes for legs & neck. Drill the leg holes at a slight outward angle.
3. Drill holes for the antlers.
4. Glue your pieces.
5. Trim the legs.

How do you make log deer ornaments?

Table of Contents

1. Introduction.
2. Step 1: Gather Logs and Branches.
3. Step 2: Stain and Cut Dowels.
4. Step 3: Drill Holes for the Legs and Neck.
5. Step 4: Use Wood Glue to Assemble the Deer.
6. Step 5: Add Antlers to the Deer’s Head.
7. Step 6: Stage the Deer in Your Yard and Enjoy.

How do you make reindeer clothespin ornaments?

Reindeer Clothespin Ornament Directions

1. Glue a loop of ribbon between two wooden clothespins. Secure the third clothespin to the top of the others, but flipped in the opposite direction.
2. When the glue is dry, cut antlers from brown felt. Glue the antlers to the reindeer’s head.
3. Cut a small tail from the felt.

How do you make Rudolph the Red Nosed Reindeer out of Popsicle sticks?

Glue a red pom pom where the craft sticks come to a point for Rudolph’s nose. 4. Glue two googly eyes to either side of the craft sticks forming the reindeer’s face….Extend the Activity:

1. Read Rudolph the Red Nosed Reindeer.
2. Cuddle up with some popcorn and watch Rudolph the Red Nosed Reindeer.

How do you make pine cone reindeer?

Instructions

1. Attach the large red pom pom to the end of the pinecone with a dot of hot glue.
2. Cut 2 ear shapes out of brown felt.
3. Glue the light brown shapes on top of the ears.
4. Glue the pinched section together with a dot of hot glue.
5. Attach the ears to the back of the pinecone with more hot glue.

What can you make with clothespins?

Here are some of the most common types of crafts you can make with clothespins:

1. Ornaments.
2. Paper Holders.
3. Wreaths.
4. Jewelry.
5. Planters.
6. Decorative Cards.
7. Clips for Food Bags.
8. Photo Holders.

What size logs do you need to build a reindeer?

It’s quite advantageous to befriend a lumberjack if you have the opportunity, or at the very least save a few logs when you have trees cut down on your property. For each reindeer you plan to build, source a large log that is roughly 10-12” diameter and 18”-24” in length for the deer torso.

What kind of wood do you use to make a reindeer?

You can use any coniferous or hardwood logs for your DIY wooden reindeer’s head and body, and the logs you choose determine how large your wooden reindeer will be. Thin logs or thicker branches work well for the legs and neck, while delicate, forked branches make great antlers.

How do you glue a reindeer to a log?

Once the glue has dried, you can stand the wooden reindeer up. Glue the neck and push it into the body log by gently tapping it with a hammer. Remove any excess wood glue by wiping it away with a damp cloth.

How do you make a deer head out of a log?

After you cut all four leg holes, roll the torso log over and in one end, spaced evenly over the leg holes, cut one more hole in which the neck dowel will attach. Cut one last hole into the smaller log designated as the deer head. Legs into the leg holes, neck into the neck hole.