How do I use the WPS button?

How do I use the WPS button?

Connecting to a WPS router

  1. Visit the Wi-Fi screen in the Settings app.
  2. Tap the WPS connection button on the router. The button either is labeled WPS or uses the WPS icon, shown here.
  3. On your Android, choose Wi-Fi Preferences.
  4. Choose WPS Push Button or WPS Pin Entry, depending on how the router does its WPS thing.

How do I find my Foscam on my network?

To find out the IP address of the Foscam camera follow the steps below.

  1. Connect the camera via an Ethernet cable to a LAN port on the router.
  2. Power on the Foscam camera.
  3. Verify the computer is connected to the same router.
  4. Standby until the camera completes the self-test.

How do I reset my Foscam WIFI?

On a Foscam outdoor camera, the reset button isn’t located on the IP camera itself, but on the bundle of connectors. There’s a black connector with a small white button on the tip. This is the reset button. Press the reset button and hold it for 10 seconds.

Can I use Foscam without Internet?

Follow the steps below to access the camera via a cellular data network. 1) Go to the App settings. Step 2: Disable the Wi-Fi Only for Streaming option. After the process is completed the camera will now be accessible via cellular data.

How do you reset a Foscam?

To reset a camera, locate the reset button and press it for approximately 30 seconds. At the end of that time the camera will reboot itself and the factory settings will be restored. Some models require only a 10-15 second timeframe.

Where is reset button on Foscam camera?

How do I use the WPS button on my AT router?

Connect a WPS Device

  1. Ensure that the WPS capable device is turned on and functioning properly. From the Advanced Wi-Fi Settings on that device, select WPS Push Button.
  2. On the AT Wireless Internet, press the WPS button.
  3. Wait a few moments for the connection to complete.

What happens if you push the WPS button?

The WPS button simplifies the connection process Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. WPS automatically sends the network password, and these devices remember it for future use.

How do I pair my foscam?

Option 1: setup via the Foscam app

  1. Connect your smartphone or tablet to your router’s network.
  2. Download the Foscam app in the App Store or via Google Play.
  3. Start the application.
  4. Create an account via the app.
  5. Scan the QR code on the camera. The app will than find the camera’s information.
  6. Follow the steps in the app.

What is the IP address for foscam?

Notice the camera’s IP address is 192.168. 1.204, this is the current IP address of the camera that we want to change. Notice that the Gateway is 192.168. 1.1, this is the IP address of the router that the camera is attached.