Does 160g vibrate?

Does 160g vibrate?

The purpose of DO-160 vibration testing, which involves a series of tests, is to demonstrate that airborne equipment complies with performance standards and durability requirements when subjected to installation-specific vibration levels.

Does 160 inrush current test?

The RTCA DO-160 power inputs test defines the test conditions and procedures for ac and dc electrical power applied to the terminals of equipment to be tested. 115 Vrms ac and 230 Vrms ac at either a nominal 400 Hz frequency or over a variable frequency range which includes 400 Hz.

Can you do a 160 temperature test?

The purpose of RTCA DO-160 temperature testing and altitude testing is to determine the performance characteristics. The RTCA DO-160 test standard defines the requirements by equipment category. The temperature and altitude test category are based on a number of variables.

What is the difference between 160 and MIL STD 810?

DO-160 contains 26 test methods, while the MIL-STD-810 covers 28. A notable difference between the battery of tests of each document is relevant to military equipment tests that only exist in MIL-STD- 810. They are: gunfire tests and acoustic noise tests.

Does 160 voltage spike?

The RTCA DO-160 voltage spike test determines whether equipment can withstand the effects of voltage spikes. These spikes arrive at the equipment on its power leads. This can occur via either ac or dc power. The adverse effects voltage spikes can have on equipment are numerous and range in degree of severity.

Do 160g Do section 16?

RTCA/DO-160 Section 16 tests verify whether the equipment will negatively affect the aircraft power system that would be harmful or degrade performance in other equipment. These tests cover both susceptibility (surge, dropout, frequency transients, etc.)

Does temperature of 160 have variation?

The purpose of RTCA DO-160 temperature variation testing is to determine the performance characteristics of equipment operating between high and low operating temperature extremes. It is important to note that this temperature testing is just temperature testing.

Do 160g Environmental Conditions and Test Procedures for Airborne Equipment?

DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, published by RTCA (Radio Technical Commission for Aeronautics), is the international standard that defines environmental test conditions and applicable test procedures and criteria for avionic equipment to determine their performance …

Do 160g Do Section 9?

The RTCA DO-160 explosive atmosphere test standard outlines requirements for aircraft equipment that may come into contact with flammable substances. These substances could be fluids, vapors or both. There are three types of test specified in the RTCA/DO-160. …

Do 160g Do section 15?

The RTCA/DO-160 Section 15 measures the magnetic effect of the equipment and its main goal is to determine the closest distance to compasses or compass sensors (flux gates) at which that unit is allowed to be installed. The deflection of the compass is equal to 1˚ when measured >0.0 m to ≤0.3 m to the equipment.

Does 160 Test Plan Generator?

The DO160 test plan generator software produces automatically the documents needed for testing according to DO160 standard. You will be able to produce automatically test plan, test report, documents in hours rather than weeks. Hundreds of DO160 experts are already using this software for their documentation!

Does 160 explosive atmosphere?

The RTCA DO-160 explosive atmosphere test standard outlines requirements for aircraft equipment that may come into contact with flammable substances. The flammable test fluids, vapors and gasses simulate those used in conventional aircraft that require oxygen for combustion.

What is the do 160 test for vibration?

RTCA DO-160 – Section 8.0 – Vibration. These tests demonstrate that the equipment complies with the applicable equipment performance standards (including durability requirements) when subjected to vibration levels specified for the appropriate installation.

What is RTCA-DO-160 vibe testing?

The testing is for restricted low fan frequency applications. Equipment meeting this description must go through RTCA-DO-160 vibe testing. The specific testing and duration of testing of a device will depend on aircraft type, location of the unit in the aircraft, and proximity of the device to the engines.

What is a standard vibration test?

Standard Vibration Test (Category S): The standard vibration test is for fixed wing aircraft. This test demonstrates that equipment will meet its functional performance requirements in the vibration environment. The vibration environment is the one experienced during normal operating conditions of the aircraft.

What is the difference between MIL-STD-704 and DO-160?

DO-160 has a similar section: DO-160 Section 16 – Power Input. Like with other military standards, the purpose of MIL-STD-704 is to define DoD requirements for aircraft equipment used by the Army, Navy, Air Force and other military branches.