# What is the difference between load range C and E?

## What is the difference between load range C and E?

The Load Range C BFGoodrich tire (manufactured by Michelin) is rated at 2,470 at 50 psi and weighs 44 pounds, while the same tire in Load Range E is rated at 3,195 pounds at 80 psi and weighs 52 pounds….Common Light Truck (LT) Load Ranges.

C 50
D 65
E 80
F 95

## What does C mean on tires?

The C-Type tire, on the other hand, is specifically meant as a commercial-rated tire, with a higher load rating for a given size than many LT tires. These C-Type tires will show the letter “C” immediately after the wheel diameter in the tire code.

Which is better Load Range D or E?

Expert Reply: Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity.

### What is a Load Range C tire?

For example, a C Load Range specifies that a tire is equivalent to a 6-ply construction tire. Both these types have a 4-ply rating, but the Extra Load can support additional load at up to 42 PSI, vs. the Standard Load’s 36 PSI. Ply Rating is on a tire to provide the load carrying capacity at specific tire pressures.

### Is Load Range D better than C?

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a C load range in the same size, like # AM1ST76 , the capacity is 1,360 pounds at 50 psi.

LR/C Load Range C – 6 ply rated 50 psi
LR/D Load Range D – 8 ply rated 65 psi
LR/E Load Range E – 10 ply rated 80 psi
LR/F Load Range F – 12 ply rated 95 psi

## What does Load Range D stand for?

It means it’s an 8 ply tire. A=2 ply. B=4 ply. C=6 ply. D=8 ply.

## Are E rated tires 10 ply?

The load range is identified by a letter of the alphabet, usually from A to F, which represents the ply rating and load pressure. A rating of “E” on the tire means the tire has a ply rating 10 and a load pressure of 80 psi.

### What are the best rated tires?

As of October 2015, the highest rated all-terrain SUV tire is the Cooper Discoverer A/T3, according to ConsumerSearch.com. The best all-season SUV tire is the Michelin LTX M/S2, the best budget SUV tire is the Continental CrossContact LX20 EcoPlus, and the best mud tire is Goodyear Wrangler MT/R with Kevlar .

### What ply is a load range E tire?

A load range E tire, used on light trucks and RVs, can have two or three fabric plies or one steel ply. The E rating indicates how much weight the tire can hold based on the strength of 10 fabric plies. Many tire shops still call them E-10 tires.

What is ply rating for tires?

A tire ply rating is an expression of the tire’s strength and capacity. The ply rating translates in a very direct way to tire capabilities and limitations, especially when it comes to inflation and load capacity. If you plan to haul, tow, or carry heavy loads with your vehicle, then understanding the ply rating of your tires is a must.

## What does the E stand for on tire ratings?

The “E” in a tire’s service rating refers to the load range of the tire. You should check your vehicle’s manual to determine what load range is appropriate. Function. The load rating shows how much air pressure the tire can contain and the strength of the sidewall.