What is residential r3?
What is residential r3?
Zoning District) This zone is a residential zoning district, Residential districts. Districts designated for residential use, RR, RS, R-1, R-2 and R-3, are limited to dwellings and the uses normally associated with residential neighborhoods.
What is r3 zoning Chicago?
RS-3 – Residential Single-Unit District – 2nd City Zoning.
What is r3 zoning in PA?
Generally, R-3 districts allow for single family dwellings (and places of worship) which are detached or semi-detached. Some uses require a Use Registration Permit; some do not. Some uses require a Certificate or Variance from the Zoning Board of Adjustment.
What are the 3 zoning districts in NYC?
New York City is divided into three basic zoning districts: Residence (R), Commercial (C) and Manufacturing (M). The three basic districts are further sub-divided to allow for a wide range of building forms and uses.
What is R3 land?
Residential Zone 3 (R3): Uses Permitted and Uses Prohibited. Uses Permitted. All types of residential buildings. Auditoriums. Bakeries and confectioneries.
What is an R3 occupancy?
R-3 Residential occupancies where the occupants are primarily permanent in nature and not classified as Group R-1, R-2, R- 4 or I, including: Buildings that do not contain more than two dwelling units. Adult facilities that provide accommodations for five or fewer persons of any age for less than 24 hours.
What is b3 3 zoning in Chicago?
Shopping centers, large stores, and retail storefronts, often along major streets. Allows more types of businesses than B1 and B2 districts. Apartments permitted above the ground floor.
What is m2 3 zoning Chicago?
Moderate manufacturing, warehouses. Also allows freight and recycling facilities.
What is R3 in building code?
What are the zoning categories?
The five main zones are: R1 Zoning NSW – General Residential. R3 Zoning NSW – Medium Density Residential. R4 Zoning NSW – High-Density Residential. R5 Zoning NSW – Large Lot Residential.
What is group 6 zoning NYC?
The NYC Zoning Resolution has Use Groups to categorize buildings based on their use. NYC Zoning Use Group 6 consists of Commercial uses such as Personal Services, Restaurants, Offices, and Retail.
What is R3 building?
In an R3 zone, new buildings, or portions of new buildings exceeding one story in height that abut an existing one-story single-family detached residential or duplex building shall not exceed a building height greater than one foot for each foot of horizontal distance from the property line.
What does R3 zoning mean in zoning?
R3 – Residential Third Density Zone (Sections 159-160) Purpose of the Zone The purpose of the R3 – Residential Third Density Zone is to: (1) allow a mix of residential building forms ranging from detached to multiple attached dwellings in areas designated as General Urban Areain the Official Plan;
What is an R3-2 zoning in Staten Island?
New Springville, Staten Island. R3-2 districts are general residence districts that allow a variety of housing types, including low-rise attached houses, small multifamily apartment houses, and detached and semi-detached one- and two-family residences. It is the lowest density zoning district in which multiple dwellings are permitted.
What is an R-3 zone in New York State?
The purpose of the R-3 zone is to allow for row dwellings, while including areas within which row dwellings are mingled with detached dwellings, semi-detached dwellings, and groups of three or more row dwellings. The R-3 zone is intended to permit attached rowhouses on small lots.
What uses are allowed in R-3 districts?
Generally, R-3 districts allow for single family dwellings (and places of worship) which are detached or semi-detached. Some uses require a Use Registration Permit; some do not. Some uses require a Certificate or Variance from the Zoning Board of Adjustment. The uses allowed in R-3 districts are listed below.