What is metering mode 60D?

What is metering mode 60D?

The metering mode determines which part of the frame the Canon EOS 60D analyzes to calculate the proper exposure. Spot metering: This mode works like Partial metering but uses a smaller region of the frame to calculate exposure. For Spot metering, exposure is based on just the center 2.8 percent of the frame.

How do I change the metering on my Canon camera?

Changing the metering mode

  1. Set the power switch to .
  2. Press the button.
  3. Press the to select < >.
  4. Press the to select [Metering mode], then press the button.
  5. Press the to select to the desired mode, then press the button.

What is a good shutter count for Canon 60D?

Canon Shutter Count Ratings

Camera Model Shutter Rating
Canon 6D Mark II 100,000
Canon 7D Mark II 200,000
Canon 60D/70D/80D 100,000
Canon T5i/T6i 100,000

What is silent shooting on Canon 60D?

Silent Mode 1 is the default, and uses an electronic shutter to initiate the exposure, and so reduces operation noise, since only the second shutter curtain must be physically operated to complete the exposure.

What is B mode on Canon 60D?

B (Bulb): Bulb mode is a special shutter speed mode, where you open the shutter normally to start taking the photo. The catch is that you keep the shutter open for as long as you hold down the shutter button.

How do I change exposure compensation on canon?

Exposure Compensation

  1. Set the camera’s power switch to .
  2. Set the mode dial to one of the following: < > < > < > < >.
  3. Press the shutter button halfway and check the exposure level indicator.
  4. Set the compensation amount. Set with the < > dial.
  5. Take the picture.

Is 5000 shutter count a lot?

When browsing, low shutter counts often indicate less heavily-used items. Fewer than 10,000 shots on a camera that is 2-5 years old is very low, with the normal amount being around 30,000-50,000. Higher-count cameras may have seen professional use (and a harder life), while lower counts indicate casual consumer use.

What shutter count is too high?

For a top-of-the-line used DSLR, many will cite the ceiling of acceptability as being upwards of a 400,000 shutter count. In other words, the more expensive a camera was originally, the more likely it will make the grade.

How many metering zones does the EOS 60D have?

Note the grid of seven by nine black squares in the centre. These are the 63 metering zones of the EOS 60D’s iFCL evaluative metering system. Evaluative metering is the most sophisticated metering mode on your EOS camera. As it is the one you are most likely to use at any time, it is useful to know how it works.

What is the exposure system for the Canon 60D?

Canon 60D Exposure. The Canon 60D adopts the same exposure system which debuted in the company’s flagship APS-C format digital SLR, the EOS 7D. Dubbed IFCL — which stands for Intelligent Focus, Color, Luminance — the new metering system takes into not only account subject luminance, but also both color information and focus distance.

How many megapixels is the Canon EOS 60D?

Canon U.S.A., Inc. | EOS 60D 18.0 megapixel CMOS imaging sensor (APS-C size) Up to 5.3 fps shooting speed; Burst Rate – 58 Large/Fine JPEGs, or 16 RAW images First EOS camera ever with vari-angle LCD monitor (over 1 million dot resolution) Full HD 1920×1080 video; manual exposure control and sound level control possible

What kind of metering system does the canon 650 have?

It was also the first Canon camera to use the newly designed EOS mount. The EOS 650 had a six zone evaluative metering mode. Evaluative metering has come a long way since then, and now most EOS cameras use a 63 zone metering system and advanced micro-processors to analyse the information gathered. The auto exposure sensor from the EOS 60D.