What is difference between a DCN690 and a DCN692 to?

What is difference between a DCN690 and a DCN692 to?

The DCN690 cordless framing nailer has a single speed, the DCN692 has two. If the DCN690 price remains the same, then the DCN692 offers more functionality for the same cost. If you only plan to use the nailer in its maximum power mode, performance *should* be comparable for both nailers.

What nails are compatible with DeWalt DCN692?

DeWalt DCN692 Features It’s capable of accepting either clipped head or offset full round head paper tape nails collated at 30 – 34 degrees. The range of lengths is from 2″ to 3-1/2″ and 0.113″ to 0.131″ diameters.

What nails are compatible with DeWalt nail gun?

Nails. The DeWalt nailer takes 2″ to 3.5″, 30 or 34 degree angled, paper tape nails, with either clipped or offset, full-round heads.

Why is my Dewalt nail gun not firing?

Clear out any jams in your Dewalt nail gun. Remove the battery and the magazine and make sure there are no fasteners causing a jam in the mechanism. If you see a jammed fastener, remove it and manually push the driver blade back up. Reinsert the battery and magazine.

Do Paslode nails work in DeWalt?

I have three Dewalt clipped head framers. I put about 90-100 thousand paslode nails through them every year. Love the paper clips because there is no shrapnel and they hold up in the weather!! I have also put them through my senco and they work well there also.

Does a DeWalt nail gun use gas?

The DCN692 is a gas-free, dual-speed, cordless framing nailer that is powered off a 20volt XR battery. This nailer will fire 2 inch to 3-1/2 inch framing nails. DEWALT claims that the DCN692 will shine in the area or minimal maintenance, and workability in cold temperatures.

Do Dewalt nail guns need gas?

The DEWALT pricing below is for the nailer and one 4.0 Ah battery pack and charger. The DEWALT represents an anomaly in the test as well. It requires no gas and therefore as long as you have charged batteries, you’ll never run out of the fuel.

Do Dewalt nail guns need oil?

No. Under no circumstances should you lubricate the tool.

Do Paslode nails work in Dewalt?

What is the difference between the DeWalt dcn690 and the dcn692?

The DCN690 DeWalt 20V Max Framing Nailer is a single-speed nailer while the DCN692 DeWalt 20V Max Framing Nailer is dual speed. Both feature a brushless motor that key in being able to make a lithium-ion framing nailer.

What size battery does a dcn692 have?

The DCN692 has two firing modes: single and bump fire. Single fire gives you the most driving power. I find that in bump fire mode, using a 5 amp hr XR battery, the nailer tops out at a 3” long x .131″ diameter nail – smooth, galvanized, or ring shank. This size gets you through most residential building code.

What are the downsides of the dcn692?

A downside to plastic is shrapnel, which can, and will, hit you in the face. A downside to paper is the full-round heads are offset and bend easily if you need to finish driving them by hand. The DCN692 has two firing modes: single and bump fire.

What is a dcn692b nail gun?

Considering that the DCN692B uses a brushless motor eliminates the need to mess around with fuel cartridges and even application of any type of lubrication. The stall release lever of the DCN692B nail gun is designed to reset the drive blade should it jam in the down position.