What is a DPDT relay used for?
What is a DPDT relay used for?
DPDT stands for double-pole double-throw relay which is an electromagnetic device used to separate two circuits electrically and connect them magnetically. They are often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage.
What is a double pole single throw relay?
The Double Pole Single Throw DPST relay is the equivalent of 2 SPST switches (NO Normally Open and NC Normaly Closed) and can be used to switch 2 different loads. We have 2 scenarios depending on the type of relay. without voltage on coil: with a NO the loads will be OFF because the current cannot flow.
What is a 4 pole relay?
4 Pin Relay 4 pin relays use 2 pins (85 & 86) to control the coil and 2 pins (30 & 87) which switch power on a single circuit. There are 2 types of 4 pin relay available; normally open or normally closed. A normally open relay will switch power ON for a circuit when the coil is activated.
What is 12V relay?
12V DC relay switches are the best solution for full voltage applications, as they allow a low current flow circuit to control a high current flow circuit, like a vehicle’s horn, headlights, auxiliary lamps, fan motors, blower motors and countless pieces of equipment existing on vehicles today. Looking Inside a Relay.
When would you use a DPDT switch?
A DPST switch is often used to switch mains electricity because it can isolate both the live and neutral connections. A pair of on-on switches which operate together (shown by the dotted line in the circuit symbol). A DPDT switch can be wired up as a reversing switch for a motor as shown in the diagram.
What is the difference between a single and double pole relay?
A pole refers to the number of circuits or wires that a switch will control. A single pole will switch one wire by opening, closing, or changing the connection in a single conductor while a double pole switch will control (by closing and opening) two separate wires or circuits at the same time.
What is 86 on a relay?
Realizing that 85 and 86 are the coil pins, these pins will be transferring the current through the coil. 85 will be used to ground your relay, while 86 will be connected to the switchable power. 87 and 87a will be connected to your controlled accessories that you wish to turn on and off with your relay.
How do I choose the right relay?
An easy way to determine the limit of a relay is to multiply the rated Volts times the rated Amps. This will give you the total watts a relay can switch. Every relay will have two ratings: AC and DC. You should determine the AC watts and the DC watts, and never exceed these ratings.