What does HF mean on Kenmore Elite washer?
What does HF mean on Kenmore Elite washer?
The FH error code indicates that the washer control does not detect water entering the machine within 30 seconds after the fill valves have been opened. It is also displayed after 8 minutes if the flow sensor has detected 10.5 gallons passing through it without the water level pressure switch tripping.
How do you reset a Kenmore High Efficiency?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
Why does my washer say HF?
1 Answer. check the screens at inlet hose connection to washer to make sure they are not clogged. Make sure that the water hoses are not kinked. Plug in washer or reconnect power.
How do I fix the FH code on my Kenmore washer?
How to Reset the FH Error Code on a Kenmore Elite Washing Machine
- Look for the “Pause/Cancel” button on the washer control panel.
- Press the “Pause/Cancel” button twice to cancel the wash cycle.
- Connect the water supply hoses back to the washer and turn on the water spigots.
What does nF mean on a Kenmore washing machine?
The nF error code on a Kenmore front-load washer means that the washer isn’t filling with water. The solution is sometimes as simple as opening the water supply faucets behind the washer. Frozen water supply lines and hoses in winter also prevent the washer from filling.
How do you unlock a Kenmore Elite washer?
You can manually unlock the washer door by reaching behind the front panel and pulling the tab located on the bottom of the lock assembly. You can now open the door and examine the interior of the lock assembly for foreign objects.
How do I clear the error code on my Kenmore washer?
What does F2 mean on washer?
: The “F2” fault code indicates it’s taking too long to drain the tub of water in order to reset the pressure switch. The problem is that the washer is not always able to drain water so that the water level switch can reset. This can happen if the wrong type of detergent is used or if you are using too much.
What does H mean Whirlpool dishwasher?
When the display shows a number up to 12, followed by an “h”, it means that the Delay Wash has been activated. To turn off the Delay Wash once it has been set, turn the power button off.
What does FH error code mean?
water supply problem
An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked. Water inlet valve screen clogged.
What does FH mean on a Kenmore Elite washing machine?
The FH error code on your Kenmore Elite washing machine is an indicator that there is a problem with incoming water. When there is little water coming into the machine, the FH code will appear and the washer will stop.
How do I Stop my Kenmore Elite Elite washer from overheating?
Press the “Pause/Cancel” button twice to cancel the wash cycle. Unplug the Kenmore Elite washer from the wall outlet. Check for kinks in the water supply hose while the washer does not have power.
When does the FH code appear on a whirlpool washing machine?
When there is little water coming into the machine, the FH code will appear and the washer will stop. There are a couple of common problems you can check while you are resetting the FH error code.