Other / May 23, 2019

How much does a Hilti laser cost?

Compare with similar items

	This item Hilti laser level PM 2-LG Line laser Laser line projectors Green laser line	Klein Tools 93LCLS Laser Level, Cross Line Level with Plumb Spot, Leveler Tool with Magnetic Mounting Clamp, Self-Leveling
Price	$49999	$14997
Sold By	ADVENTURER’S BAG	Amazon.com

Is Rotary laser level accurate?

Accuracy of a rotary laser level ranges from +/- 1/16th to +/- 1/8th of an inch per 100 to 50 feet. Although this accuracy is greater than a spirit level (or a bubble level), a spirit level cannot give you the distance a laser level can.

Are Hilti lasers waterproof?

Operators can use it at a range of 6 feet, all the way up to 2,000 feet (using the included laser receiver). It can survive a fall from a tripod at standard working heights, and it’s also dust tight and water resistant, with an IP 66 rating.

What is a plumb laser?

They are intended for transferring points from one surface to another. This could be for making sure a joist or wall is plumb (vertical) or to ensure pipes traveling from floor to floor are plumb.

What should I look for in a rotary laser level?

A faster RPM means the laser has a greater range but the beam projected is dimmer and more difficult to see. A slower RPM means a lesser range but the beam is brighter and easier to see. If you are working outdoors, a rotary laser with a faster RPM would be the the most appropriate for your project.

How far can a laser level reach?

There are many different types of levels used in construction, surveying and landscaping, so the exact distance can vary. A quality rotary laser level can typically reach between 1,000 and 1,200 feet, although some can reach as far as 2,000 feet. Check your particular level for more accurate information.

Are datum lasers any good?

Occasional direct eye exposure can cause irritation, but does not cause any permanent eye damage – similar to a camera flash. To summarise, the Datum Constructor Laser Level is an efficient class II laser level that is completely safe to use.

How does a pipe laser work?

A pipe laser is a type of construction laser that is used to measure and determine the correct grade for pipes. Pipe lasers are used as a sort of electronic level. Essentially, this equipment shoots a high-powered beam of light at a predetermined angle to establish the appropriate grade of a construction project.

How do you use a vertical laser level?

How to Set Grade with a Laser Level

Set up the laser level on a tripod on firm dry ground.
Turn on the laser level and give it a moment to self-level.
Identify the initial height of your grade.
Place the bottom of the leveling rod at the desired height.
Adjust the laser detector up or down until you hear a beep.

What is a rotary laser level?

A rotary laser level is an instrument that spins a beam of light fast enough to create a complete 360 degree horizontal or vertical plane. They can be used internally for fit-out projects or externally, with a laser receiver and staff, for groundworks – i.e. digging down or building up.