Popular guidelines /

How do you use a Stanley light timer?

How do you use a Stanley light timer?

Put the “on/timer” switch located adjacent to the dial to the “timer” position and plug the timer into the outlet. 3. Set the current time – turning clockwise, align the arrowhead (See diagram) on the dial of the timer to the present time (lines above the numbers are in increments of 30 minutes).

How do you program a Stanley Christmas light timer?

How to Program a Stanley Holiday Light Timer

  1. Plug the Stanley Light Timer into an outdoor grounded outlet.
  2. Insert the plug for the holiday lights into the outlet on the timer.
  3. Turn on the switch for your holiday lights (if there is a switch.)
  4. Look at the LED display on the Light Timer.

How do you set a Stanley digital timer?

To set Time: Press and hold TIME button. Release OFF button see less Plug the unit into an outlet. You should see the display come on in just a few seconds.

Why is my light timer not working?

If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Get on a sturdy ladder and twist the bulb fully into the socket. If the light still fails to turn on, the light bulb might be burned out. Replace the bulb with a new one.

How do you use Intermatic timer?

How to Set an Intermatic Wall Timer

  1. Erase all previous timer settings by sliding the control lever left to the “Off” position.
  2. Move the control lever to the “On” position.
  3. Turn the time dial clockwise until you reach the half hour that is closest to your present time.
  4. Press the time dial to set the present time.

What does F and D mean on an outdoor timer?

F: timer is off. 1 2 3 4 5 6 7 8 9: from dusk to dawn count down number of hours repeated every day. That’s most useful to control outdoor lightings. A: from dusk to dawn count down number of hours which is randomly selected by this timer. Which is usually for indoor use to turn lights on and off for number of hours.