Other /

How do you reset the sensor on a Kenmore washing machine?

How do you reset the sensor on a Kenmore washing machine?

To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.

How do I know if my washer is agitating?

The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.

What causes a washer not to agitate or spin?

Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the lid switch assembly fails, the washer will not spin.

What is diagnostic mode on washer?

The washer’s diagnostic mode can be used to troubleshoot washer problems by viewing logged washer errors, performing an automatic diagnostic cycle, or manually turning on and off different washer parts to test for proper operation.

What does sensing mean on a Kenmore washer?

First, What is the Sensing Cycle? The auto-sensing function on your Kenmore HE washer is designed to conserve water and automate the entire washing process. It helps ensure that just the right amount of water is used to wash your load of laundry.

Does Kenmore washer have reset button?

Kenmore Elite Washers are the top-end model of washing machines the company makes available to consumers. If you have started a load in your Kenmore Elite HE washer and need to reset it, simply press several buttons on the control panel.

What does sensing mean on a Kenmore washing machine?

Why won’t my Kenmore washer agitate?

If the washer won’t agitate the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and transmission. If the washer won’t agitate the drive belt might have worn out.