How do you reset the drum light on a Brother HL L2320D?

How do you reset the drum light on a Brother HL L2320D?

How to reset the drum counter:

1. Open the front cover.
2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
3. Close the front cover.
4. The Drum LED should now be off.

How do you reset the drum light on a Brother printer?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

Why does my Brother printer say drum?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

How do you check the drum life on a Brother printer?

You can view your current drum’s remaining life on your Brother machine’s LCD by following these steps.

1. Press MENU and choose Machine Info. => Drum Life.
2. Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
3. Press the STOP/EXIT key.

How do you reset the drum on a HL l2380dw?

How to reset the drum counter:

1. Make sure the front cover is closed.
2. Press the “X” on the printer to display to interrupt the “replace drum” message.
3. Press the tool button (settings) > All Settings > Machine Info. >
4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do I reset my brother hl 2130 drum unit?

How to reset the drum counter:

1. Make sure the machine is on, then open the front cover.
2. Press and hold the “Go” button for about 4 seconds or until all the LEDs light up.
3. Release the “Go” button and close the front cover.
4. If the drum light is off, the drum unit is reset.

How do you reset the drum counter on a Brother HL l2380dw?

How do you fix a drum on a Brother printer?

Reset the drum counter Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display Drum Unit, and then press OK. Press the Up arrow key to reset the drum counter.

How do I know if my printer drum needs replacing?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

How do I reset the drum light on a Brother DR630?

How to Reset DR630 Drum for all other Brother HL Printers

1. Open the front compartment door.
2. Press and hold the “OK” button for about 2 seconds.
3. When “Drum Unit” appears on the display, press “OK”
4. Press the arrow button until the display reads “Reset”
5. Reset the counter to zero.
6. Close the front compartment door.

What do the lights on the front of my Brother machine mean?

The technical term for the lights on the front of your Brother machine is Light Emitting Diodes (LED’s). This FAQ explains the meaning of those different LED indications. When all the LEDs are off, the machine is in Power Off mode.

Why is the toner (yellow) LED flashing on my Brother machine?

The Toner (Yellow) LED is flashing. The Drum, Paper and Ready LEDs are off. The toner cartridge is not installed correctly. Remove the drum unit, remove the toner cartridge from the drum unit, and put the toner cartridge back into the drum unit. Reinstall the drum unit in the machine. > Click here to see how to reinstall the toner cartridge.

Does the brother limited warranty apply to third party drum units?

The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner. For more information on other LED indications, click here. For the information on an error message which appears on the status monitor, click here.