Blog /

How do you program a One For All universal remote?

How do you program a One For All universal remote?

How to Program your One For All® remote

  1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER the 3 digit code for your brand.
  4. You should receive 2 quick flashes after entering your code.

How do I find the code for my one for all remote?

Find your product

  1. On the inside of the battery door of your One For All remote control.
  2. On the back or bottom of your One For All product.
  3. On the front of every original One For All manual.
  4. On the original One For All packaging.

What is the code for a universal remote?

4 digit codes for GE Universal remote controls (DVD Players)

Brand 4 Digit Code
KENWOOD 0400 0429
KISS 0428
KLH 0430 0906 0386
KONKA 0410 0411 0412 0413 0905

How do I find my TV code for remote?

How to Find a Code for My Remote Control

  1. Look through the User’s Manual for your remote control to find the code section.
  2. Go to an website listing code, such as the Remote Code List (See References).
  3. Call the manufacture of your remote and ask whether it can tell you the codes you need.

How do you program a one for all TV remote?

Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.

How do I program my one for all remote to my TV?

Can I use a universal remote for any TV?

Can universal remotes work on all TVs? Most of the time, yes, a universal remote should work on any television. But it’ll depend on the make and model of your remote and your TV. On the whole, your universal remote should work with all TVs made in the past ten years or so.

Do universal remotes work with all TVs?

How to program a RCA Universal Remote?

First you need to “Turn The Device On”

  • Press the “TV” on your “RCA universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure,just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

    • What are remote codes for RCA TV?

    The RCA Universal Remote has eight different codes for RCA televisions and nine for VCR ‘s. There are two different codes for cable boxes. The TV codes are 000, 006, 011, 019, 027, 034, 038 and 044. The VCR codes are 000, 005, 007, 008, 028 035, 037, 054 and 069. The cable box codes are 000 and 027.

    What is RCA Universal Remote?

    The RCA Universal Remote is a remote that can be programmed to work with most televisions, VCR ‘s and cable boxes. Each brand has a specific code that must be programmed into the remote.

    What is an universal remote?

    A universal remote is a remote control that can be programmed to operate various brands of one or more types of consumer electronics devices. Low-end universal remotes can only control a set number of devices determined by their manufacturer, while mid- and high-end universal remotes allow the user to program in new control codes to the remote.