How do I set up DirectAccess on Windows Server 2012?

How do I set up DirectAccess on Windows Server 2012?

1. Login to your Server 2012 R2 server we will be using for installing the Direct Access.
2. Ensure all windows updates have been applied.
3. Open up Server Manager.
4. Select Manage -> Add Roles and Features.
5. Click Next > on the Before you Begin step.
6. Ensure Role-based or feature-based installation is checked and click Next >

How do I connect to a DirectAccess Server?

Configure DirectAccess with the Getting Started Wizard

1. In Server Manager click Tools, and then click Remote Access Management.
2. In the Remote Access Management console, select the role service to configure in the left navigation pane, and then click Run the Getting Started Wizard.
3. Click Deploy DirectAccess only.

What are the server requirements for DirectAccess?

The DirectAccess server must be a domain member. The server can be deployed at the edge of the internal network, or behind an edge firewall or other device. If the DirectAccess server is located behind an edge firewall or NAT device, the device must be configured to allow traffic to and from the DirectAccess server.

What is DirectAccess in Windows Server?

DirectAccess, also known as Unified Remote Access, is a VPN-like technology that provides intranet connectivity to client computers when they are connected to the Internet. DirectAccess was introduced in Windows Server 2008 R2, providing this service to Windows 7 and Windows 8 “Enterprise” edition clients.

What port does DirectAccess use?

IP-HTTPS-Transmission Control Protocol (TCP) destination port 443, and TCP source port 443 outbound. If you are deploying Remote Access with a single network adapter, and installing the network location server on the DirectAccess server, TCP port 62000 should also be exempted.

How are the clients configured to use DirectAccess?

To configure DirectAccess clients In the Select Groups dialog box, select the security groups that contain your DirectAccess client computers. Select the Use force tunneling check box to route all client traffic (to the internal network and to the Internet) through the Remote Access server, if required. Click Next.

What is the difference between VPN and DirectAccess?

DirectAccess can be used to provide secure remote access and enhanced management for Windows laptops managed by IT, while VPN can be deployed for non-managed devices.

What is the difference between DirectAccess and VPN?

How do I set up DirectAccess on Windows 10?

To access DirectAccess information in Windows 10, press Window Key + I, click Network & Internet, and then click the DirectAccess tab.

What is DirectAccess used for?

“DirectAccess provides users transparent access to internal network resources whenever they are connected to the Internet.” DirectAccess does not require any user intervention or any credentials to be supplied in order to connect.

Is DirectAccess free?

DirectAccess is a feature of Windows that allows a PC to automatically connect to the corporate network whenever it detects an Internet connection. DirectAccess is “free” …

How do I install and configure DirectAccess in Windows Server 2012?

The method of installing and configuring DirectAccess has been simplified with the release of Windows Server 2012. You can install DirectAccess using either the graphical interface or Windows Powershell. To install DirectAccess open up Server manager console and click on Add Roles and Features link and navigate to the Roles section.

DirectAccess in Windows Server. As a role service of the Remote Access server role, DirectAccess is a feature that allows connectivity to organization network resources without the need for traditional Virtual Private Network (VPN) connections.

Can I deploy DirectAccess and routing and remote access service on the same server?

In Windows Server® 2012 R2 and Windows Server® 2012, you can deploy both DirectAccess and Routing and Remote Access Service (RRAS) on the same server, allowing you to provide DirectAccess connectivity to supported clients as well as providing VPN access to remote clients that do not support DirectAccess.

How do I host a VPN and DirectAccess on the same server?

In Windows Server 2012 you can configure the server to host both VPN and DirectAccess services simultaneously. Additionally, you can install the Routing service on the same machine: To install DirectAccess using Powershell, use Get-WindowsFeature to list available roles and then execute Install-WindowsFeature RemoteAccess –IncludeManagementTools.